Home » Products » Sanitary Hose & Hose Assemblies » FDA Rubber Hoses » FDAE Hose

FDAE Hose

FDAE Hose

With an EPDM tube and rubber cover, the FDAE hose should be the EPDM hose of choice for any suction application.

Food Grade FDA EPDM Rubber Suction and Discharge Rubber Hose

  • TUBE: Smooth White EPDM
  • COVER: Grey EPDM Rubber
  • REINFORCEMENT: Two polyester spirals with dual helix wire
  • TEMPERATURE: -20°F to 300°F
Resources Additional Specs
Part Number Hose ID Inch Hose OD Inch Bend Radius Inch Max. Working Pressure @70°F PSIG Vacuum Rating @ 70°F in. Hg. Weight per FT
08RFFDAE 0.50 0.97 1.50 300 FULL 0.30
12RFFDAE 0.75 1.27 2.50 300 FULL 0.44
16RFFDAE 1.00 1.50 3.00 300 FULL 0.57
24RFFDAE 1.50 2.09 4.50 300 FULL 0.91
32RFFDAE 2.00 2.63 6.00 250 FULL 1.30
40RFFDAE 2.50 3.17 8.00 200 FULL 1.74
48RFFDAE 3.00 3.72 10.00 200 FULL 2.42
64RFFDAE 4.00 4.78 14.00 150 FULL 3.22
96RFFDAE 6.00 6.79 28.00 100 FULL 5.35

Disclaimer: The information provided within by Rubber Fab is deemed to be accurate; however, it should be used only as a general reference to aid in product selection and application.

Note: A material’s properties may be affected greatly by temperature, operating pressure, concentration, and the presence of other chemicals. Ultimately, the consumer/user must determine the compatibility of any material based on tests done under particular process conditions.

Additional Specs

  • Ultra smooth inner bore
  • Will not impart taste or odor
  • Full vacuum
  • Abrasion resistant
  • Chemical and ozone resistant
  • Static grounding available
  • Sanitary suction and discharge
  • Hot air blower service for food applications
  • Food and beverage transfer
  • Dairy
  • CIP pharmaceutical applications
  • Non-fatty and non-oily food products
  • Broad variety of hose fittings in 316L Stainless Steel
  • PTFE encapsulated
  • Kynar®/PVDF and other nonmetallic materials
  • Electropolished Stainless Steel Fittings Available
  • Crimped fittings available in other high quality alloys
  • 3-A Sanitary Standards 62-02
  • FDA 21 CFR 177.2600
  • USDA
  • Conforms to the construction criteria of the Grade A Pasteurized Milk Ordinance
3A